- Jan 04, 2016
-
-
Tom Rini authored
Signed-off-by: Tom Rini <trini@konsulko.com>
-
Peng Fan authored
Use snprintf to replace sprintf. Coverity log: " Unbounded source buffer (STRING_SIZE) string_size: Passing string init_val of unknown size to sprintf. " Reported-by: Coverity Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
-
Peng Fan authored
Before calling hsearch_r, initialize callback entry to NULL. Coverity log: " Uninitialized scalar variable (UNINIT) uninit_use_in_call: Using uninitialized value e. Field e.callback is uninitialized when calling hsearch_r. " Reported-by: Coverity Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org>
-
Peng Fan authored
Whether CONFIG_SYS_HUSH_PARSER is defined or not, should always check to free 'buff' to avoid memory leak. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Simon Glass <sjg@chromium.org>
-
Miao Yan authored
In struct e1000_rx_desc, field 'length' is declared as uint16_t, so use le16_to_cpu() to do endianness conversion. Also drop conversion on 'status' which is declared as uint8_t. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
-
Miao Yan authored
In pci_map_region(), pass 'range_id' to fdt_read_range(), otherwise the same address will be mapped again in other calls to pci_map_region() Signed-off-by: Miao Yan <yammiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alexander Graf <agraf@suse.de>
-
Heiko Schocher authored
using checkpatch with Perl 5.22.0 generates a warning, this is fixed in linux through commit: commit 4e5d56bdf892e18832a6540b63ebf709966bce2a Author: Eddie Kovsky <ewk@edkovsky.org> Date: Wed Sep 9 15:37:52 2015 -0700 checkpatch: fix left brace warning Using checkpatch.pl with Perl 5.22.0 generates the following warning: Unescaped left brace in regex is deprecated, passed through in regex; This patch fixes the warnings by escaping occurrences of the left brace inside the regular expression. Adapt it for U-Boot. Signed-off-by: Heiko Schocher <hs@denx.de>
-
Eric Nelson authored
Table 41 of the JEDEC standard for eMMC says that bit 31 of the command argument is obsolete when issuing the ERASE command (CMD38) on page 115 of this document: http://www.jedec.org/sites/default/files/docs/jesd84-B45.pdf The SD Card Association Physical Layer Simplified Specification also makes no mention of the use of bit 31. https://www.sdcard.org/downloads/pls/part1_410.pdf The Linux kernel distinguishes between secure (bit 31 set) and non-secure erase, and this patch copies the macro names from include/linux/mmc/core.h. Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Eric Nelson <eric@nelint.com> Tested-by: Hector Palacios <hector.palacios@digi.com>
-
git://git.denx.de/u-boot-ubiTom Rini authored
-
Ladislav Michl authored
drivers/mtd/ubi/io.c:1354:3: error: 'dump_len' undeclared (first use in this function) dump_len = max_t(int, 128, len - i); Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
-
- Jan 03, 2016
-
-
git://www.denx.de/git/u-boot-imxTom Rini authored
-
Peng Fan authored
Move setup_display from board_early_init_f to board_init. Add more clock settings. Add blacklight iomux setting. Add display_info_t info for the lvds screen. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
-
Gong Qianyu authored
This could avoid executing the code that only applies to i.MX platforms. The bus_i2c_init() is called before relocation and will assgin value to a static variable. If U-Boot is then still running in a flash device, it's theoretically not allowed to write data to flash without an erasing operation. For i.MX platforms, the U-Boot is always running in DDR. Actually it causes asynchronous error when the ARM64 system error report is enabled and the flash write protect is set. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: Heiko Schocher <hs@denx.de>
-
Stefano Babic authored
Check for bmode before reading the boot device to check if a serial downloader is started, and returns UART if the serial downloader is set, letting SPL to wait for an image if CONFIG_SPL_YMODEM_SUPPORT is set. This allows to load again a SPL based board with imx_usb_loader together with a tool such as kermit. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Tim Harvey <tharvey@gateworks.com> CC: Fabio Estevam <Fabio.Estevam@freescale.com> CC: Eric Nelson <eric.nelson@boundarydevices.com> Reviewed-by: Eric Nelson <eric@nelint.com> Tested-by: Eric Nelson <eric@nelint.com>
-
Michael Heimpold authored
For some board designs, it might be useful to switch the DC-DC clock source to something else rather the default 24 MHz, e.g. for EMI reasons. For this, override the mxs_power_setup_dcdc_clocksource function in your board support files. Example: void mxs_power_setup_dcdc_clocksource(void) { mxs_power_switch_dcdc_clocksource(POWER_MISC_FREQSEL_20MHZ); } Signed-off-by: Michael Heimpold <mhei@heimpold.de> Cc: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
-
Michael Schanz authored
Use the macro SETUP_IOMUX_PAD(...) rather than imx_iomux_v3_setup_multiple_pads(...) in order to setup the pin configuration for ECSPI1. ARRAY_SIZE(pads) provides the wrong size for imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads)) in case of MX6QDL. In the particular case, the content of GPR12 is overwritten and the IPG/AHB/ATB/ATP clocks are deactivated. Therefore, the connection to the system via JTAG is not possible anymore. Furthermore, kernel version 3.0.35 hangs during bootprocess in the function etm_init(). Signed-off-by: Michael Schanz <michael.schanz@congatec.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
-
Måns Rullgård authored
If fecmxc_initialize_multi() fails, it frees but does not unregister the mdio bus, causing subsequent uses of the "mii" command to crash. Fix this by adding mdio_unregister() calls where needed. Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Eric Nelson <eric@nelint.com>
-
Måns Rullgård authored
If the host clock frequency is higher than 100 MHz, the MDIO hold time needs to be increased from its current setting of one cycle in order to meet the specified minium of 10 ns. Writing an appropriate value to the HOLDTIME field of the MII_SPEED register achieves this. Comment copied from Linux kernel. Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Eric Nelson <eric@nelint.com>
-
Maximilian Schwerin authored
This patch writes the default values for TXTL and RXTL to UARTx_UFCR. Without this patch some older kernel versions crash as UARTx_UFCR was not always correctly initialized. Signed-off-by: Maximilian Schwerin <maximilian.schwerin@tigris.de>
-
Eric Nelson authored
The low four bits of the SYSCTL register are reserved on the USDHC controller on i.MX6 and i.MX7 processors, but are used for clocking operations on earlier models. Guard against their usage by hiding the bit mask macros on those processors. These bits are used to prevent glitches when changing clocks on i.MX35 et al. Use the RSTA bit instead for i.MX6 and i.MX7. >From the i.MX6DQ RM: To prevent possible glitch on the card clock, clear the FRC_SDCLK_ON bit when changing clock divisor value(SDCLKFS or DVS in System Control Register) or setting RSTA bit. Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Hector Palacios <hector.palacios@digi.com>
-
Peng Fan authored
Drop duplicated debug info for tcl. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
-
- Jan 02, 2016
-
-
git://git.denx.de/u-boot-usbTom Rini authored
-
- Dec 31, 2015
-
-
Stefan Brüns authored
The ifdef'ed Linux kernel code uses the 1 based port number, whereas U-Boot puts a 0 based port number into the register. The reason the 0 based port number apparently works can probably be taken from the USB 2.0 spec: 8.4.2.2 Start-Split Transaction Token ... The host must correctly set the port field for single and multiple TT hub implementations. A single TT hub implementation *may ignore* the port field. Actually, as far as I understand, a multi TT hub defaults to single TT (bAlternateSetting: 0) until switched via SetInterface, so even "port 42" would work. The change was verified by hardcoding the port number to a wrong value, SPLIT transactions kept working (although using a DWC2 instead of MUSB). Tested hubs are the RPi onboard SMC9514 and an external "05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB". The former is a multi TT hub, the latter single TT only. Addendum: Tested on sunxi/MUSB by Hans de Goede Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com>
-
Stefan Brüns authored
Start split and complete split tokens need the hub address and the downstream port of the first HS hub (device view). The core of the function was duplicated in both host/ehci_hcd and musb-new/usb-compat.h. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com>
-
Stefan Brüns authored
flush_dcache_range may access data after priv->aligned_buffer end if len > DWC2_DATA_BUF_SIZE. memcpy may access data after buffer end if done > 0 Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
-
Stefan Brüns authored
The configuration descriptor includes all interface, endpoint and auxiliary descriptors (e.g. report, union) so 512 bytes may not be enough. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
-
- Dec 28, 2015
-
-
Thomas Chou authored
Allow ctrl-c to abort the erase ops. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
-
Thomas Chou authored
Show sector erase progress with dot and comma. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
-
Thomas Chou authored
Skip erase if the sector is blank. The sector erase is slow, and may take 0.7 sec typically or up to 3 sec worst-case. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
-
Thomas Chou authored
If the erase fails, fail_addr might indicate exactly which block failed. If fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level or was not specific to any particular block. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
-
Thomas Chou authored
Erase is an asynchronous operation. Device drivers are supposed to call instr->callback() whenever the operation completes, even if it completes with a failure. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
-
- Dec 27, 2015
-
-
http://git.denx.de/u-boot-sunxiTom Rini authored
-
Hans de Goede authored
There are some reports of stability issues at 672 MHz, see: http://linux-sunxi.org/Orange_Pi_PC#DRAM_clock_speed_limit So reduce the DRAM speed to 624MHz which seems to be reliable everywhere. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
-
- Dec 24, 2015
-
-
git://git.denx.de/u-boot-socfpgaTom Rini authored
Conflicts: include/configs/axs101.h Signed-off-by: Tom Rini <trini@konsulko.com>
-
- Dec 23, 2015
-
-
Chin Liang See authored
Updated pinmux group GENERALIO[15-16] for i2c. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: shengjiangwu <shengjiangwu@icloud.com>
-
shengjiangwu authored
Updated pinmux group EMACIO[1-8] and EMACIO[10-13] for USB. Signed-off-by: shengjiangwu <shengjiangwu@icloud.com> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de>
-
- Dec 22, 2015
-
-
Marek Vasut authored
Add common configuration bits for the Denali NAND controller and also support for using it as a boot device in SPL. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
-
Marek Vasut authored
It is not possible to compile DFU MMC support if the MMC support is not compiled into U-Boot. Secure the code with an ifdef to prevent compiler splat. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
-
Marek Vasut authored
It is not possible to compile MMC/SPI SPL if the respective DM_MMC/DM_SPI bits are not enabled. Secure the code with an ifdef to prevent compiler splat. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
-
Marek Vasut authored
Make sure the NAND reset is not asserted in full U-Boot. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
-